A new challenger line of UTVs from Cub Cadet was introduced in early 2015 and one of them was Challenger 700. Presented as a good value at a low price, the model comes equipped with a digital display,quick-release windshield, a hard top roof, and alloy wheels as features. For these excellent features, it gained huge popularity. However, many users also complained of some drawbacks in Cub Cadet 700.
In most cases, the drawbacks could have been avoided with regular maintenance and troubleshooting. So, in this article, we are going to discuss the common problems of Cub Cadet Challenger 700 and the solution to the problems so that you can solve them by yourself.
Common Cub Cadet Challenger 700 Problems
- Starting Problem
- Starts But Stops After a While
- Faulty Brakes
- Problems with Clutch
- Reverse Problem
Whether you live in rocky and hilly terrain or love off-road journeys you would need a UTV vehicle to drive you to your desired destinations. You need to be aware of the problems you might encounter with the Cub Cadet Challenger 700 if you own it or are thinking about purchasing one. You should also be aware of the correct solutions, so you can resolve them correctly. So, the common problems and solutions of Cub Cadet Challenger 700 are given below:
1. Starting Problem
Starting problem is a very common problem of many UTV vehicles even with other Model series of Cub Cadet UTVs. it might be caused because of many reasons like- not enough fuel, dried up fuel, loose connection, and faulty ignition switch, etc.
If you face starting problem with your UTV Challenger 700 you should troubleshoot your vehicle and find out the main cause of the problem and work accordingly. If you find there is not enough fuel, then you must refill it. And remember to check your fuel every time before you want to start your vehicle. Also, check the spark plugs. If they are broken, then there is a lack of proper connection between the instruction button and the parts. In that case, you have to replace the spark plugs. And if you find your ignition switch is faulty then you fix it or replace it.
2. Starts But Stops After a While
If your Challenger 700 starts but turns off after some time then there might be a faulty engine behind it. However, if you troubleshoot and find out the engine is fine, then all there is to blame is debris or clogged air filters. Fuel lines, tanks, or filters that have an excessive amount of corrosion or debris significantly affect these components by blocking them up causing starting failure.
If you had read the manual correctly, you would not have had this situation. Because UTV vehicles travel over muddy terrain, air filters and other components are likely to get dirty and clogged easily. According to the manual, air filters need to be cleaned regularly. A driveline blockage, or an installation problem, could also contribute to the problem. Also, make sure the belt is in great shape and is properly tensioned. If not, get them fixed with the help of an expert.
3. Faulty Brakes
Faulty brakes in UTV vehicles can be the cause of huge and serious accidents. There is no greater risk than this while driving especially in rough or hilly terrain. The main reason behind faulty brakes can be because of air getting in the components of brakes.
To avoid sudden brake failures you must check the brake system is working properly before starting off your journey on your UTV. If you find any kind of problem while troubleshooting the brakes, you need to fix them with the help of experts. Also, you might need to replace them if they are damaged beyond repair.
4. Problems with Clutch
The clutch of Cub Cadet Challenger 700 is not able to keep up with the quality of overall performance of the UTV vehicle. Even if you do your maintenance work regularly, you might have problems with your clutch.
The quality of the clutch is something you need to deal with if you choose the Cub Cadet Challenger 700. You might need to regularly replace it which is very frustrating. However, you can increase the clutch’s lifespan by not putting too much pressure on it or avoiding using the clutch to control your Challenger 700’s speed.
5. Reverse Problem
You might not be able to engage the reverse right way you want to with your Cub Cadet Challenger 700. This is a problem for many users. You might also face the problem of having no backup or reverse. This can happen if your drive belt is faulty or broken or has a poor connection. You might experience jerking on your UTV if this problem occurs.
To solve the reverse problem you need to troubleshoot the problem and find out the exact reason for the problem. If the problem is with the drive belt then you should replace it. But if that is not the problem you might need to get your Cub Cadet checked up by an expert.
Related Article: 5 Common Cub Cadet Challenger 550 Problems and Solutions
Hope this article helped you with identifying the reasons for the problems that you might face with your Cub Cadet Challenger 700 and taking action accordingly. However, if you find the problems too hard to handle for you then you might decide not to purchase this model of UTV vehicle and that is completely fine.
Nevertheless, you should remember every machine or vehicle has its problems and most of them can be solved with regular troubleshooting and proper maintenance.